We're Here to Help

Width is always listed first and depth is second. This is also the side that the door is located. Example: 10’x8’ (10’ wide by 8’ deep.)

Your shed kit will be delivered curbside within 3-6 weeks after purchase. Delivery time may vary during peak seasonal times.

Our shed kits are protected in shrink-wrap to prevent damage during shipping and are delivered curbside via a residential carrier. Shed kit is secured to a pallet and the dimensions are roughly 4ft. x 8ft. in size and weigh nearly 2,000 lbs.

Assembly usually takes 2-3 days depending on experience. It’s a great weekend project.

Shingles and roofing nails are not included with purchase. We prefer to give customers the option to choose their own color to match their home, personal preference and coordinate with their shed color scheme.

Unless specified in marketing materials, a complete wood floor is included. Our standard floor consists of 2”x4” framing with 16” joist spacing and 5/8” sheets to cover the floor frame.

Our sheds can be built with the common tools found in your garage.

Required tools:

• Drill
• Level
• Square
• Safety glasses
• Caulk gun
• Utility knife

We suggest a minimum of 3’ clearance around your shed in order for you to construct the building properly. A minimum of 4’ is recommended if your shed is 12’ wide or more.

Yes, there are specific dimensions that the slab will need to be to fit the shed. Contact us for specific dimensions. Please allow seven days for curing before building the shed on the slab.

Leveling blocks are not required in all states/counties and are only needed if the build site is out of level.

Permitting is usually determined by your township based on the size structure you choose. You should check with your local Building Authority and Homeowners Association prior to assembly to make sure your shed is compliant with all codes, easements and setbacks. If engineered drawings are required, please contact us to receive signed and stamped drawings.

No. Painting is the homeowner’s responsibility. Our sheds are built using pre-primed wood siding and is light beige in color. 100% acrylic latex paint is required. Paint all exterior horizontal and vertical joints. Doors should be painted on all six sides including front, back and all four edges. Painting your shed to match your home often meets HOA requirements.

Your shed should be caulked and painted within 30 days after assembly.

Your shed should be viewed like a home and all critical joints should be caulked with paintable caulk. Caulking prevents water from entering your shed. You should caulk any seams, gaps, horizontal and vertical joints prior to painting.

Our sheds meet or exceed 40 pounds per square foot.

Our sheds are designed and engineered to meet approximately 90 M.P.H. wind speeds and between 20 and 30 pounds of snow load depending on the shed model.

If you wish to cancel your order, please check out the section on this site labeled “Cancellation/ Returns”.

Fill out the form on this site within the replacement parts or warranty/repair section.

Like your home, your new shed will require occasional maintenance to ensure many years of use. In addition to re-painting, you should perform other maintenance.

• Keep all grass and other vegetation trimmed around the entire perimeter of your shed.
• Sheds which are built on a wood floor should be constructed on 4x4 treated runners to resist damage from ground moisture and insects (treated wood 4x4 runners are not included in kit). These runners also elevate your floor, allowing for important air circulation under the foundation. This circulation must be maintained to ensure long life of your wood foundation.
• Do not stack anything against the exterior of your building, such as mulch, soil and firewood for any period of time.
• Locking door handles or levers should be sprayed with silicone or other lubricant to maintain locking mechanism and prevent freezing in cold climates.
• We do not recommend insulating or heating your building.
• Do not let sprinklers spray your building.